| PART |
Description |
Maker |
| 3B-850A |
TYPICAL OPERATIONG CONDITIONS
|
http://
|
| BGA318 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| TL802A-1 TL801 |
TYPICAL INSTALLATION DIAGRAM
TYPICAL INSTALLATIION DIAGRAM
|
List of Unclassifed Manufacturers
List of Unclassifed Manufac...
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| TC1410N C1410COA C1410COA713 C1410CPA C1410CUA C14 |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T
0.5A High-Speed MOSFET Drivers
|
http://
MICROCHIP[Microchip Technology]
|
| ECS-250-20-33-TR |
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
|
ECS, Inc.
|
| MCP60104 MCP604T MCP601 MCP601-E_CH MCP601-E_OT MC |
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
2.7V to 5.5V Single-Supply CMOS Op Amps
|
MICROCHIP[Microchip Technology]
|
| MQF73-125-1500-02 |
Environment conditions: Corresponding to Vectron standard CF001
|
Vectron International, ...
|
| FMCE-0528 FMCE-0528-TR |
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55掳 to 125掳C
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55° to 125°C
|
Interpoint Corporation Company
|
| MCP619-I/P MCP619-I/SL MCP619-I/ST MCP617-I/MS MCP |
The MCP619 quad operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 ...
The MCP617 dual operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 ...
The MCP618 operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 µA ...
The MCP616 operational amplifier (op amp) has a gain bandwidth product of 190 kHz with a low typical operating current of 19 µA ...
|
Microchip
|
